Filter
Top Products
32
You can find out from your Blaupunkt
dealer which navigation systems can be
used with your car radio.
If a traffic information message is re-
ceived during a telephone call or whilst
a navigation announcement is being
made, the traffic message will only be
played after the call or voice output is
finished.
If you are already listening to a traffic
announcement and a telephone call
arrives or the navigation system wish-
es to make a voice output, the traffic
announcement will first be heard. Once
the traffic message is finished, you can
listen to the call or the voice output.
You can set the volume level at which
telephone calls and the navigation voice
output will first be heard.
➮ Press the MENU button <.
➮ Keep pressing the or button
; until “TEL VOL” appears in the
display.
➮ Set the required volume using the
and buttons ;.
When you have finished making your
changes,
➮ press the MENU button < twice.
Note:
● You can directly adjust the volume
of telephone calls and navigation
voice output (whilst they are being
heard) using the volume control
?.
ADJUSTING THE VOLUME
Configuring the confirmation
beep
For some functions you will hear a con-
firmation beep if you keep a button
pressed for longer than two seconds.
For instance, after storing a radio sta-
tion to a station button you will hear a
confirmation beep. You can configure the
beep.
➮ Press the MENU button <.
➮ Keep pressing the or button
; until “BEEP OFF” or “BEEP ON”
appears in the display.
“BEEP OFF” means that the confirma-
tion beep is switched off, “BEEP ON”
means that it is switched on.
➮ Make your selection using the or
button ;.
When you have finished making your
changes,
➮ press the MENU button <.