Filter
Top Products
9
ENGLISH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Radio operation
Switching to the radio mode
If you are currently using the tape play-
er or CD changer,
➮ press CD•C < repeatedly until
“RADIO” appears in the display.
Selecting wavebands/memory
banks
Using this car audio system, you can
tune into radio stations on the FM and
AM wavebands. There are three mem-
ory banks for the FM waveband and one
memory bank for AM. You can store five
stations in each of these memory banks.
Selecting FM
➮ To switch between the FM wave-
bands FM1, FM2 and FMT, press
FM 2.
Selecting AM
➮ To switch between the AM wave-
band, press AM 6.
Tuning into radio stations
You can tune into radio stations in a
number of different ways.
Automatic seek tuning
➮ Press or >.
The radio will tune into the next availa-
ble station within reception range.
➮ Once you have selected the
desired settings, press MENU ?.
Mute
You can reduce the volume of the car
audio system immediately (mute).
➮ Press 4.
Selecting the mute level
It is possible to select the mute level.
➮ Press MENU ?.
➮ Press > repeatedly until
“MUTE LEVEL” appears in the
display.
➮ Press > to select the mute
level.
➮ Once you have made your selec-
tion, press MENU ?.
Telephone mute
If your car audio system has been
equipped with a mobile telephone, it will
automatically switch to mute when you
use the phone. This will not work un-
less the mobile phone is connected to
the car audio system as described in
the installation instructions.
The car audio system will be muted to
the mute level selected.
VOLUME CONTROL RADIO OPERATION