44
When you have fi nished making your chang-
es,
press the ESCAPE button <.
Note:
You can use the volume control 7 to
adjust the volume of telephone calls
and navigation announcements whilst
you are listening to them.
Switching the confi rmation beep
on/off
The system will output a confi rmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "BEEP ON" or "BEEP OFF" appears
on the display.
Switch the BEEP ON or OFF with the
or
button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button <.
u
u
u
u
u
Telephone Audio/Navigation
Audio
Muting during telephone mode
If your car sound system is connected with
a cell phone or navigation system, "picking"
up the phone or a voice output of the navi-
gation system automatically mutes the car
sound system. The call or the voice output
is played back via the loudspeakers of the
car sound system. For this purpose, the cell
phone or the navigation system must be
connected to the car sound system as de-
scribed in the installation instructions.
You can fi nd out from your Blaupunkt dealer
which navigation systems can be used with
your car sound system.
If you answer a call or a navigation an-
nouncement takes place, the display shows
"PHONE".
Adjusting the volume for telephone
audio/navigation audio
During a telephone call or a voice output of
the navigation, no traffi c announcements
are switched through. The traffi c announce-
ment is not recorded!
You can set the volume level at which the
telephone calls or navigation announce-
ments are mixed in.
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "TEL VOL" appears on the display.
Press the
button 4 to open the
menu.
Set the desired volume with the
or
button 4.
u
u
u
u
Volume
02_SevillaMP38_gb.indd 4402_SevillaMP38_gb.indd 44 02.11.2007 8:50:16 Uhr02.11.2007 8:50:16 Uhr