Filter
Top Products
111
User settings
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKA
Changing display settings
(DISPLAY MENU)
In the Display menu, you can change the fol-
lowing display settings:
Day/night brightness
(DAY/NIGHT DIMMER LEVEL)
Adjusting the display viewing angle
(ANGLE ADJ)
DISPLAY MENU
USER MENU
CD
·C
ROC
K
P
OP
C
LA
S
MIX
RPT
mp3
To call up the Display menu:
Press the MENU/OK button
?.
Press the rocker switch
or = re-
peatedly until "DISPLAY MENU" appears
on the display.
Press the rocker switch
: to open
the menu.
The display menu appears.
Adjusting the display viewing angle
(ANGLE ADJ )
The angle at which the driver looks at the
display is dependent upon, among other
things, the installation position of the de-
vice, the seating position, and the physical
size of the driver. You can adjust the display
to suit your viewing angle by changing the
contrast as follows.
In the Display menu, press the rocker
switch
= until "ANGLE ADJ" is dis-
played.
Press the rocker switch
: to call up
the setting.
•
•
u
u
u
u
u
Press the rocker switch
or = to
change the display contrast.
You can adjust the display contrast in
13 increments from –6 to +6.
Changing the day/night brightness
(DIM DAY/DAY NIGHT )
The device automatically switching to night
mode if you turn on the light of your vehicle.
A prerequisite is that the device is connect-
ed with your vehicle via a corresponding
connection as described in the installation
instructions.
You can adjust the display brightness sepa-
rately for day and night.
In the Display menu, change between
the menu items with the rocker switch
or =.
"DIM NIGHT" (night brightness)
"DIM DAY" (day brightness)
Press the rocker switch
: to call up
the setting.
To change the display brightness:
Use the rocker switch
or = to
select a brightness level between 1
and 16.
u
u
•
•
u
u
02_BA_Hamburg_gb.indd 11102_BA_Hamburg_gb.indd 111 26.03.2007 11:34:10 Uhr26.03.2007 11:34:10 Uhr