Filter
Top Products
55
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
➮ Adjust the minutes with the / but-
ton, 7.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Selecting 12/24-hour clock mode
➮ Press the MENU button, 8.
➮ Press the or button, 7, as often
as is necessary for “24 H MODE” or “12
H MODE” to appear in the display.
➮ Press the or buttons, 7, to switch
between the modes.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Having the time displayed
constantly when the device is
switched off
➮ If you want the time to be displayed
when the device is switched of and the
ignition is switched on, press the MENU
button 8.
➮ Press the or button, 7, as often
as is necessary for “CLK OFF” or “CLK
ON” to appear in the display.
➮ Press the or button, 7, to switch
between the display being ON or OFF.
➮ Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Equalizer
This device has a parametric digital equaliz-
er. In this case, parametric means that in each
of the three filters, one individual frequency
can be emphasised or reduced (with a gain
of +8 to -8 dB).
The following filters are available:
● LOW EQ 32 - 200 Hz
● MID EQ 250- 1,600 Hz
● HIGH EQ 2,000 - 12,500 Hz
These filters can be set without using any
measuring instruments. It allows the sound
properties in the vehicle to be significantly
affected.
Adjustment instructions
We recommend using a familiar CD to per-
form this adjustment.
Before making any adjustments to the equal-
izer zero the tone settings and deactivate the
loudness. For more information, read the sec-
tion on “Tone and volume”.
➮ Listen to a CD, tape cassette or Mi-
niDisc (according to how the radio is
equipped).
➮ Compare the sound you hear with how
you feel it should be.
➮ Now consult the “Equalizer adjustment
guide” table for “Tone impression”.
➮ Adjust the equalizer values as de-
scribed under “Action”.
Switching the equalizer on and
off
➮ To switch off the equalizer, press the
DEQ button, 6.
“LOW EQ” is shown on the display.
➮ To switch off the equalizer, hold down
the DEQ button, 6 until “DEQ OFF”
briefly appears.
EQUALIZERTIME