Filter
Top Products
21
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
• Press the KeyCard in, which releases
the card and puts it in the proper positi-
on for being removed.
• Remove the first KeyCard and insert
the new one while “CHANGE” is still
being displayed.
Now you can also use the new KeyCard for
operating your unit.
A maximum of two cards can be used per set.
When trying to “define” a third one, the sy-
stem will automatically delete the access
authorisation of that KeyCard which was not
used for the “learning” process.
Displaying the radio pass data
You can use the KeyCard supplied with the
unit to display the individual radio pass data
such as the model name, the type number
(7 6 ...) and the serial number:
• Press and hold down preset buttons
1 and 6 while switching on the unit.
• Press the TS button within 2 seconds.
The radio pass data will move through the
display several times.
To quit the function:
• Press any button.
After approximately 10 seconds, the display
will show “TURN OFF”. Now turn off the set.
When inserting a card of a different kind (like
for example a credit card), the display will
show “WRONG KC” for approximately 2 se-
conds.
Remove the wrong card and turn off the set.
Do not make further adjustments until you
have a correct KeyCard available.
Removing the KeyCard
Never pull out the KeyCard directly.
• First press the KeyCard in.
This releases the card and puts it in the
proper position for being removed.
• Now you can pull it out.
“Defining” a second KeyCard/
Replacing a KeyCard
While operating the unit with the first Key-
Card, you can “define” a second one to be
also used with the set:
• Insert the first KeyCard and turn on the
set.
• Press the DSC button and select
“LEARN KC” with
/ .
The display will switch to “CHANGE”.
KeyCard theft-protection system
This car radio is supplied with one KeyCard
as standard.
However, the unit can also be operated with
a second card.
If you have lost or damaged your KeyCard,
you can buy a new one from your specialised
dealer.
When using two KeyCards, you can indivi-
dually store the following functions:
Bass, treble, balance and fader settings,
assignments of preset buttons, Loudness,
TA (traffic announcement volume), BEEP
volume.
In addition to this, the settings activated be-
fore switching the radio off, such as the
waveband, station, TA priority, Loudness,
AF, REG ON/OFF and seek tuning sensitivi-
ty, will also remained stored.
This ensures that the basic settings you have
programmed will automatically be activated
as soon as you have inserted your KeyCard.
Putting the unit into operation
• Turn on the set and introduce the Key-
Card into the slot with the contact area
showing up (KeyCard tongue pulled
out).
The car radio is now ready for operation.
If a wrong KeyCard is inserted, then “CARD
ERR” will appear in the display. In this case
please do not go on operating the set.
BA Trier RCR 126 gb® 13.05.2002, 11:52 Uhr21