Filter
Top Products
73
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Selecting and storing PTY program
types
When PTY is switched on, it is possible to
display the last PTY selected and the stored
program types for approx. 8 sec. One pro-
gram type is stored on each of the station
presets 1 to 6 at the factory.
Display the program types by
• pressing << or >>.
The program type selected last will appear
in the top line of the display. At the same
time, the stored program types will appear
in the display beside the corresponding pre-
set buttons.
Selecting stored program types
Now you can select one of the stored pro-
gram types. To do so,
• Press one of the presets 1 - 6.
To select any program type
You can select any of the program types.
To do so
• press << or >> repeatedly until the pro-
gram type you would like to select ap-
pears in the top line of the display.
Storing program types
You can store any of the available program
types on any of the preset buttons 1-6.
• Select a program type as described
above.
• Press down the desired preset button
1-6 until you hear a beep.
The program type has been stored.
PTY seek tuning
The seek tuning function can be used to find
the PTY stations for the program type se-
lected.
Important: PTY is switched on and you have
selected the program type.
Starting seek tuning:
• Press
/ on the rocker switch.
Seek tuning will stop at a PTY station broad-
casting the selected program type.
If no station offering the selected program
type can be found currently in your recep-
tion range, the set will switch back to the
station you were previously tuned into.
As soon as it is possible to receive a pro-
gram in the broadcasting network with the
PTY selected, the radio will switch over to
the corresponding station for the duration
of the program.
Example:
German broadcasting network NDR:
- Station playing: NDR3.
- “PTY” is switched on.
- Program type “POP” selected.
- Seek tuning is started.
- No station with “PTY-POP” can be
found.
- The display shows “No PTY” and
- automatically switches back to NDR3.
- NDR2 airs a “PTY-POP” program.
- The radio will switch to the linked sta-
tion NDR2 for the duration of the
“POP” program.
During CD operation, the set will also switch
to the program offering the selected PTY
within the broadcasting network.
After the PTY program has ended the sys-
tem will switch back to the previous mode
(radio or CD).
Use STOP to return to the previous station
immediately. Press PTY to switch the PTY
function off.
Note:
As already mentioned, these functions are
not supported by all of the RDS stations at
the present time.
Radio operation with RDS (Radio Data System)