Filter
Top Products
ENGLISH
E-4
Adjusting the Menu Items
1. Press the
MENU
to enter the display adjustment mode,
(indicates the Clock temporaliry) then press the
or
to select the desired adjustment mode as table
below.
2. Press the or or rotate the VOL dial to adjust
the selected item.
Use the following tables as a guide for adjusting the set-
tings in each mode. Adjust within 6 seconds after select-
ing the item. After 6 seconds, the unit returns to previous
indication.
or
Adjustment Range
MAIN DISP (See right column)
SENS HI LO /
Hi
LEVEL LO OFF /
LO
/ HI
MESG ON OFF /
ON
CLK SET (See page 3)
24H MODE 12H /
24H
CLOCK ON OFF /
ON
AREA SET USA /
EURO
•A italicized letter is an initial value.
Tips
• MAIN DISP
You can adjust with which priority items are to be displayed
in the Main display. Display priority can be set for the fol-
lowing items in each mode.
Radio
FREQ : Frequency indication. (Initial value)
CLOCK : Clock indication.
TAPE
STATUS : PLAY,FF,REW.
CLOCK : Clock indication.
CDC
D/TRK/TIM : Disc/Track/Elapsed Time.
CLOCK : Clock indication.
AUX
AUX TITLE : AUX.
CLOCK : Clock indication.
• SENS HI (Local/DX) (Radio mode only)
This feature is used to select the signal strength at which
the radio will stop during Seek Tuning.
If you select the Local setting and only strong (local) sta-
tions will be received. The “ lo ” appears on the display win-
dow. Select the Distant setting and the radio will stop at a
wider range of signals, including weaker more distant sta-
tions. The “ lo ” will go out on the display window. DX is the
suggested default setting.
LO : Local.
HI : DX.
• LEVEL LO (Level sens)
The sensitivity of the level meter display can be switched.
OFF : Off.
LO : Normal sensitivity.
HI : High sensitivity.
• MESG (Message)
Turn on/off message can be switched.
OFF : No message is diplayed.
ON : A message is displayed when power on/off.
• CLK ADJ
Adjust the clock. (See page 3)
• 24H MODE
12H or 24H can be switched.
12H : Clock uses a 12-hour display system.
24H : Clock uses a 24-hour display system.
• CLOCK ON
Clock indication when the power off can be switched.
OFF : The Clock indication and illumination is not
displayed after power off.
Press the
MENU
to recall the clock indica-
tion for few seconds when power off.
ON : The Clock indication is displayed after power
off.
• AREA SET (Radio mode only)
This unit is supplied pre-set at the factory for reception of
European radio stations. Use in other areas of the world
may require different channel spacing.
Select the desired area, then press the
SRC
or
PWR
.
USA : For North America.
EURO : For Europe.
*A previously preset station is cleared when you change the
area.
Mute while telephoning
If your car audio system is equipped with a mobile telephone,
it will automatically switch to mute when you use the phone.
This will only work if the mobile phone is connected to the car
audio system as described in the installation instructions.
The volume will be reduced to the configured volume mute
level.
04.4.11, 2:27 PM4