![](http://pdfasset.owneriq.net/5/50/5507a3a1-dad0-4108-a609-2b2e26e29bc4/5507a3a1-dad0-4108-a609-2b2e26e29bc4-bg9.png)
9
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Adjusting the volume
The volume can be adjusted in steps
from 0 (off) to 66 (maximum).
➮ To increase the volume, turn the
volume control 2 to the right.
➮ To decrease the volume, turn the
volume control 2 to the left.
Setting the power-on volume
You can set the unit’s default power-on
volume.
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “ON VOLUME” appears in
the display.
➮ Set the power-on volume using the
and buttons :.
If you change the setting to “0”, the pow-
er-on volume will be the same as the
volume level that was set before the unit
was last switched off.
Note:
● To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
when the unit was switched off, the
volume will be reset to “38” when
the unit is switched on again.
When you have finished making your
changes,
➮ press the MENU button 8 or OK
; twice.
Instantaneous volume reduction
(mute)
This feature allows you to instanta-
neously reduce (mute) the volume to a
level preset by you.
➮ Briefly press button 3.
“MUTE” appears in the display.
Setting the mute level
You can set the unit’s mute volume lev-
el.
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “MUTE LEVEL” appears in
the display.
➮ Set the mute level using the and
buttons :.
When you have finished making your
changes,
➮ press the MENU button 8 or OK
; twice.
Telephone audio / navigation
audio
If your car radio is connected to a mo-
bile telephone or a navigation system,
the unit’s volume will be muted as soon
as you “pick up” the telephone or as
soon as a navigation announcement is
made. The caller or voice output will
then be heard over the car radio loud-
speakers. In order for this to work, the
mobile telephone or navigation system
must be connected to the car radio in
the manner described in the installation
instructions.
ADJUSTING THE VOLUME