Filter
Top Products
50
TECHNICAL DATA
External audio sources
In place of the CD changer it is also
possible to connect other external au-
dio sources to the line output. These
sources can include a portable CD play-
er, MiniDisc player or MP3 player.
If there is no CD changer connected to
your unit, two external audio sources
can be hooked up.
The AUX output has to be switched on
in the install menu.
To connect up an external audio source,
you will need an adapter cable, obtain-
able from any authorised Blaupunkt
dealer.
Switching the AUX input on/off
➮ Press the MENU button 8.
“MENU” appears on the display.
➮ Press the or button : re-
peatedly until “AUX-IN-1 OFF” or
“AUX-IN-1 ON” appears on the dis-
play.
➮ Press the or button : to
switch AUX on or off.
➮ Press the MENU button 8 or OK
; once you have completed the
setting.
Note:
When the AUX input is switched on, it
can be selected using the CD•C button
@.
EXTERNAL AUDIO SOURCES
Technical data
Amplifier
Output power: 4 x 25 watts sine
in accordance
with DIN 45 324 at
14.4V,
4 x 45 watts max.
power
Tuner
Frequency ranges:
FM : 87.5 - 108 MHz
MW : 531 - 1 602 kHz
LW : 153 - 279 kHz
(Wiesbaden CD51 does not feature
MW and LW)
FM transmission range:
35 - 16 000 Hz
CD
Transmission range:
20 - 20 000 Hz
Pre-amp output
4 channels: 3 V
Input sensitivity:
AUX 1 input : 2 V / 6 kΩ
Subject to changes!