Filter
Top Products
50 Spring Street,Ramsey,New Jersey 07446,U.S.A.
201-934-8500 FAX: 201-934-9832
WebSite:www.bogen.com
The AMBSL1 and AMBSQ1 are warranted to be free from defects in material or workmanship for two (2) years from the date of sale to the original purchaser.Any part of the
product covered by this warranty that,with normal installation and use,becomes defective will be repaired or replaced by Bogen,at our option,provided the product is shipped
insured and prepaid to: Bogen Factory Service Department,50 Spring Street, Ramsey,NJ 07446,USA.The product will be returned to you freight prepaid.This warranty does
not extend to any of our products that have been subjected to abuse,misuse, improper storage, neglect,accident,improper installation or have been modified or repaired or
altered in any manner whatsoever,or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER'S SOLE AND EXCLUSIVE
REMEDY.BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND,EITHER EXPRESS OR IMPLIED,AND ALL IMPLIED WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOW-
ABLE BY LAW.Bogen's liability arising out of the manufacture,sale or supplying of products or their use or disposition,whether based upon warranty,contract,tort or oth-
erwise,shall be limited to the price of the product.In no event shall Bogen be liable for special,incidental or consequential damages (including,but not limited to,loss of prof-
its,loss of data or loss of use damages) arising out of the manufacture,sale or supplying of products,even if Bogen has been advised of the possibility of such damages or loss-
es.Some States do not allow the exclusion or limitation of incidental or consequential damages,so the above limitation or exclusion may not apply to you.This warranty gives
you specific legal rights,and you may also have other rights which vary from State to State.
Products that are out of warranty will also be repaired by the Bogen Factory Service Department -- same address as above or call 201-934-8500.The parts and labor involved
in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department.All shipping charges in addition to parts and labor charges will be at the
owner's expense.All returns require a Return Authorization number.
08/10/2004
Grille with
speaker assembly
Mounted
back box
enclosure
3. Make electrical connections. Power (24V DC) and audio
are supplied to each speaker via separate 2-terminal
pluggable connectors (Figure 2) . When two or more
speakers are used in a single paging station,wire all audio
and power supply connections in parallel.
Power supply connections are made at the 24V DC
screw terminals marked "+" and "–".The speaker power
input is not polarity sensitive and will also work proper-
ly if the "+" and "–" connectors are reversed.
Audio Input connections are made at the screw termi-
nals marked “TIP” and “RING.” Connect all TIP terminals
together and all RING terminals together. Reversing
these connectors on a speaker will cause it to cancel
bass response of adjacent speakers.
4. Secure the speaker/faceplate assembly to the mounted
enclosure (Figure 3). Use four 1” screws (included).
5. Attach the rotary knob to adjust the speaker’s volume
(Figure 3).The knob is detachable to prevent tampering
with the volume, and can be left in place or removed as
desired.
Figure 3 - Secure faceplate
Figure 2 - Amplifier PC Board
“+”
Terminal
“RING”
Terminal
“TIP”
Terminal
Detachable Knob
1” Screws,2 of 4
1” Screws,2 of 4
“–”
Terminal