Filter
Top Products
Bosch Security Systems | 2007-10 | PLE-2MA120-US, PLE-2MA240-US en
Plena Mixer Amplifier | Installation and User Instructions | Connections and settings en | 21
4.2 Connecting outputs
4.2.1 Zone 1 and 2
Connect speakers to the 70 V, 25 V or 4 Ohm terminal
on the Euro style pluggable screw terminal connector
(24) at the rear of the unit.
Also see section 4.2.5 “Connecting speakers”.
4.2.2 Call only
Connect speakers to the 70 V terminal on the Euro style
pluggable screw terminal connector (24) at the rear of
the unit.
Also see section 4.2.5 “Connecting speakers”.
4.2.3 Music only
Use the music master output connector (23) to provide a
dedicated music out source for another device. For
example, the music master output can be connected to a
telephone coupler, so that callers can listen to music
when they are put on hold (see figure 4.7).
To select the dedicated music out source, set the master
switch for “line out or music only” (22) to “music only”.
Only the music inputs (18, 19, and 20) will be audible.
All other inputs, including the Tel. emergency/70V
input will not be sent to this output.
To hear all mixed inputs (microphone/line, emergency,
and music) set the master switch for “line out or music
only” (22) to “line out”.
4.2.4 Line out/ loop through
Use the Pre-out, amp in insert (21) external sound
processing equipment (e.g. an equalizer or Plena
feedback suppressor) to be connected between the
preamplifier and the power amplifier stages. See figure
4.7.
figure 4.7: Connecting music source inputs