Filter
Top Products
High Performance LCD Monitors Installing the Monitor | en 23
Bosch Security Systems, Inc. Installation Manual F.01U.076.723 | 3.0 | 2009.03
Note: To select between AV1 and AV2, press Input (see
Figure 2.1, Item 1 or Figure 2.2, Item 1) located on the front of
the monitor.
4.4 Connecting the Y/C (S-Video) Signal to the
Monitor
There is one (1) mini-DIN type connector for the S-Video (Y/C)
input (see Figure 4.2) on the rear side panel.
Note: Both Y and C inputs are terminated with 75 Ω resistors.
Figure 4.2 Y/C Connection Pinout
4.5 Connecting Audio to the Monitor
There are two (2) sets of mono audio connectors for audio
input, located at the side panel.
– All audio inputs are active loop-through.
– Audio 1 is associated with Video 1 or Y/C; Audio 2 is
associated with Video 2.
4.5.1 Connecting PC Audio
The rear bottom panel has PC stereo audio IN and audio OUT.
Connect with 1/8 in. mini phono plug jack to Audio IN.
Number Input
1GND
2GND
3 Y-signal IN or OUT
4 C-signal IN or OUT
Input Audio 1 Audio 2
Video 1 X
Video 2 X
S-video X