Filter
Top Products
7
INSTALLING iPod INTO THE BUILT-IN iPod DOCKING
5. iPod OPERATION
Always follow the below steps to install the iPod into the docking station. Incorrect or improper
installation may cause permanent damage to the docking or the iPod unit.
Press down
Never pull out this stick unless
docking is completely release out.
Step 1
Step 2
Step 3
Step 4
Press down the button as indicated
below to unlock the iPod docking.
Pull out
Pull out the iPod docking
as shown below.
Pull out this stick
Pull out the iPod connector
as indicated below.
Once the stick is
Push inwards
Push the stick & the connected iPod
inwards until it stops.
Push the docking back
into the Cabinent
Push the iPod docking inwards into
the unit’s cabinent until a click sound
is heard.
Press toward this
lock switch
completely pulled out,
user should see the
iPod connector,
and user can
connect
the iPod
to the
connector
as shown in this step.
Press on these buttons
on both sides as
Press down this button
indicated below to unlock
the iPod holder.
Step 5
Step 6
Step 7
Step 8
P ress towards the iPod unit to hold the
Press the iPod holder on both sides
to hold the iPod firmly in place.
i P od unit firmly in place