Filter
Top Products
16) SOURCE BUTTON (SOURCE)
Pressthis buttonto removethe controlpanel.
6. BASIC OPERATIONS
1) PANEL RELEASE BUTTON (REL)
12) POWER ON/OFF BUTTON
5) DISPLAY BUTTON (DISP)
Pressthis buttonto turnon or off the power.
Press this button briefly, the LCD will display the clock for about 2 seconds, then return to previous
displaymode.
Under clock displaymode, pressDISP buttonuntil theLCD flashes,press Tuning UpButton toadjust
hourandTuningDownButtontoadjustminute.
ClockAdjustment
7
The RESET button is located on the main unit (as shown on the diagram). To press it vertically with a
ballpointpenormetalobjectwillactivateit.Theresetbuttonistobeactivatedforthefollowingreasons:
RESET BUTTON
This unit features AUX IN line input jacks on both the front (headphone type) and rear (RCA
type) panels.
PLEASE NOTE:
These two inputs cannot be used simultaneously. If
you have a source unit plugged into the rear panel
jack and wish to listen to a portable device (such as
an MP3 player) by using the front panel jack, be sure
to power off the unit plugged into the rear unit to
avoid interference.
Similarly, if you have a device plugged into the front
panel jack and wish to listen to the unit plugged into
the rear panel, be sure to turn off the front panel
device.
To select either the front or rear AUX IN device as a listening source, press the SOURCE
button to select AUX mode. To cancel AUX IN listening, press SOURCE again.
19) FRONT (AND REAR PANEL) AUXILIARY INPUT JACKS
3.5mmAudioIn Cable(not included)
RightAudio
LeftAudio
Ground
1
2
3
AUX IN JACK IN PANEL
Press this button to select different source, sequence as follow:
MODE PRIORITY
A) Tuner mode (Radio)
B) CDP / MP3 (only if a CD or MP3 disc is inserted)
C)
D) SD / MMC (Only if a SD or MMC card is inserted)
USB (only if a USB drive is inserted)
E) AUX IN (Only if this unit with this features)
Whenever a USB or SD/MMC is being inserted, unit will automatically switch to USB or
SD/MMC mode, does not matter the unit is currently in what source.
When in USB or SD / MMC source, if the USB or SD / MMC is being removed, unit will
automatically switch to radio source.
PressSOURCE buttonformorethan3secondstoactivateorturnofftheSub-woofer
(Sub-wooferon/offisanoptionalfeature).
SUB-WOOFER ON/OFF
Initialinstallationoftheunitwhenallwiringiscompleted.
Allthefunctionbuttonsdonotoperate.
Errorsymbolonthedisplay.
Note: If the unit cannot function normally after reseting please usea cotton swab soakedin
isopropylalcoholtocleanthesocketonthebackofthecontrolpanel.
,