Filter
Top Products
4
Control Functions
FRONT RCA Inputs
RCA cables marked “FRONT” from head unit or from other line level device
should be connected here. Use both inputs (L & R) for stereo.
FRONT, REAR, and SUBWOOFER Remote Inputs
Use the supplied FEMALE quick connector to connect the REMOTE trigger lead
from the head unit to the amplifier. Amplifier turns “ON” when head unit is turned
“ON.” One FEMALE .210" connector is supplied with amplifier. The remote inputs
are all in parallel. Only one is to be used. Use any one of the three remote inputs
to turn the amplifier on. Do not connect external 12-volt accessories to these
inputs.
FRONT, REAR, and SUBWOOFER Input Sensitivity Controls
Turn control clockwise to increase the amplifier sensitivity to incoming signals. Turn
control counterclockwise to decrease the amplifier sensitivity.
FRONT and REAR Highpass Crossover Controls
To use 12dB/octave crossover, move switch to right-hand position. Highpass
crossover frequency is adjustable from 20Hz to 350Hz by rotary control. (Moving
switch to left-hand position will bypass crossover functions.)
HIGHPASS
OFF
ON
20
350
Hz
200
1
2
1
2
3
4
POWER
B+
B+
POWER
GND
GND
L
R
FRONT SPEAKER OUTPUT
L
R
REAR SPEAKER OUTPUT
SUBWOOFER OUTPUT
ON
SAFE
STATUS
2
1
SUBWOOFER OUTPUT
HIGHPASS
OFF ON
5
0.2
V
INPUT SENSITIVITY 2.6
20
350
Hz
200
REMOTE
POWER
B+
B+
POWER
GND
GND
FUSE 3 x 30A
FRONT SPEAKER OUTPUT
L
R
REAR SPEAKER OUTPUT
L
R
12dB
24dBOFF
LOWPASS
50
350
Hz
200
N ON PR IN TA BL E AR E A
REAR INPUT
STEREO
MONO
L+R
HIGHPASS
OFF
ON
5
0.2
V
INPUT SENSITIVITY 2.6
0.7
1.2
Q/HP
0.95
20
350
Hz
200
REMOTE
MONO
L
FRONT
+ REAR
SUBWOOFER LEVEL
OFF
ON
5
0.2
V
INPUT SENSITIVITY 2.6
0.7
1.2
Q/HP
0.95
REMOTE SUBWOOFER LEVEL
STEREO
3
4
5
12
9
8
7 1110
4
6
3 35
2 2 11