Parts And Specifications
3
Included Hardware: GT-475 GT-4100
Installation Manual 1 1
Female Quick-Connect Terminal 1 1
(for remote turn-on input)
2mm Hex Wrench 1 1
3mm Hex Wrench 1 1
Mounting Screws 4 6
Parts List
Specifications
Technical Specifications: GT-475 GT-4100
Rated Power (CEA-2006-A):
@ 4-Ohm (Stereo): 75 Watts x 4 100 Watts x 4
@ 2-Ohm (Stereo) 120 Watts x 4 150 Watts x 4
@ 2-Ohm (Mono) 250 Watts x 2 450 Watts x 2
Mixed Operation (CEA-2006-A):
@ 4-Ohm (Stereo) & 2-ohm (Mono): 75 W x 2, 250 W x 1 100 W x 2, 450 W x 1
Rated Power (12v):
@ 4-Ohm (Stereo): 65 Watts x 4 85 Watts x 4
@ 2-Ohm (Mono) 200 Watts x 2 330 Watts x 2
Frequency Response (-3dB): 10Hz–95kHz 10Hz–95kHz
Signal-to-Noise Ratio (A Weighted): >100dB >100dB
THD+N: 0.03 0.03
Highpass Crossover:
Frequency Range: 20Hz - 350Hz 20Hz - 350Hz
Slope (dB Per Octave): 12dB 12dB
Lowpass Crossover (Rear Channel Only):
Frequency Range: 50Hz - 350Hz 50Hz - 350Hz
Slope (dB Per Octave): 12dB 12dB
Signal Voltage Input Range: 200mv - 8v 200mv - 8v
Fuse Amp Rating:
40 Amp
80 Amp
Dimensions:
Width: 14
3
⁄4” (375mm) 22
1
⁄4” (566mm)
Height: 2
3
⁄8” (61mm) 2
3
⁄8” (61mm)
Depth: 9” (229mm) 9” (229mm)