Filter
Top Products
7
Basic Operations
Turn on/off the Power
1. Press to turn on the unit.
The unit goes back to the last status after
power on.
2. Press
again to power off.
Mute
When power on, press
to cut the sound.
Note:
• Doing the operation aboveagain or
adjusting volume will release muting.
•Mute iconappears onthe TFT during
muting.
Adjust the Volume
Rotate the knob on the panel or press VOL +/-
on the remote control to increase or decrease
the volume.
The adjustable range of volume is 0 to 39.
Playing Source Selection
Method 1
Short press the SRC button on the panel
or remote control to cycle through all the
available sources.
Method 2
In any mode, long press the SRC button on
the panel or remote control to enter main
source menu , then use navigate button to
select the desired mode, and press the
OK
button to confirm.
Note:
•When some devices are not ready, they
cannot be selected.
•Youshouldstopswitchingwhentheplaying
source you desired has been selected and
wait for some seconds, the unit will auto
enter the playing source mode you have
selected.
When Reverse Driving
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the original work mode after the reverse
driving is done.