Filter
Top Products
BR20DAB
13
Dynamic Range Control (DRC)
DRC adds or removes a degree of compression to compensate for the differences in
the dynamic range between radio stations. For example, a station broadcasting
popular music may have a high level of compression applied since the emphasis is
on a constant high listening level. Where as a station broadcasting classical music
will have little or no compression as the listener requires all of the highs and lows in
the music to define the detail.
There are three levels of compression:
DRC off = No compression applied
DRC high = Maximum compression applied (this is the default)
DRC low = Low compression applied
The best way to determine which of these settings suits you best is to experiment
with them on a variety of source material.
Press
the MENU
Button to access the menu.
Rotate the SELECT Button until “DRC” is displayed.
Press the SELECT Button to confirm.
Rotate the SELECT Button to select between the three DRC values. The available
options appear on line 2 of the display. When the required DRC value is displayed
press the SELECT Button to confirm.
You should be able to hear the difference in compression immediately.
Station Prune
The Station Prune function allows you to remove stations from the station list that are
not active or cannot be received. These stations usually appear in the display with a "?".
Press
the MENU
Button to access the menu.
Rotate the SELECT Button until "Prune" is displayed.
Press the SELECT Button to confirm.
Rotate the SELECT Button to highlight either No or Yes
Press the SELECT Button. If you have chosen to prune the station list, the
unwanted stations will be deleted.
Daily Use DAB+
1
2
3
4
5
1
2
3
4
5
System Settings
To make adjustments to the settings on the DAB+ Radio:
Press the MENU
Button to access the menu.
Rotate the SELECT Button until "System" is displayed.
Press the SELECT Button. The following options: Time, Backlight, Factory Reset
and Software (SW) version are available.
1
2
3