Filter
Top Products
It is recommend that you layout your sound system design on paper first.
This will help you during the installation so that you will have a wiring
flow chart and not miss-wire any of your components.
Mount the amplifier in the trunk or hatch area of your vehicle. Never
install an amplifier in the engine compartment or on the firewall. Please
be sure to leave breathing room around the amplifier heatsink so that it
can dissipate the heat it produces efficiently. The amplifier can be
installed either horizontally or vertically.
When mounting the amplifier on the trunk floor, be sure to watch for your
gas tank, gas lines and electrical lines. Do not drill or mount any screws
where they might penetrate the gas tank of your car.
POWER/GROUND WIRING
The Amadeus amplifiers are supplied with built-in fuses, we suggest that
you construct a Red wiring harness with 2 additional fuses. One fuse
should be located near the car battery. This fuse near the battery offers
protection against damage from short circuits to the car chassis between
the battery and the amplifier. A second fuse closer to the amplifier offers
additional safety to the amplifier itself. This fused red power wire should
be attached to the amplifier power terminal marked 12V+.
The wire harness should be made of red primary cable of at least 4 gauge.
The harness should terminate in a large ring terminal for connection
directly to the positive terminal of the car battery. Use a spade plug to
attach the wire, which connects to the amplifier location marked 12V+.
A second black color wire of equal gauge should be used as a ground
connection to a welded chassis member. When connecting the ground
wire make sure that there is no paint or other insulator blocking a good
ground connection. When installing multiple amplifiers, mount them in
close proximity so that they can all share the same ground point. Attach
the black ground wire to the amplifier screw terminal marked Ground.
We recommend that you use our Cadence ZIK-8 or ZIK-4 amplifier
installation kit, which contains all the cabling and accessories necessary
for a good, reliable installation.
5