Filter
Top Products
TB0362A Page 2 of 14 05/28/10
SC-1000 / 1012 / 1022-10 SPECIFICATIONS
AMPLIFIER INPUT POWER: 9-16 Volts DC, 8 Amps DC
SIREN MODE
OUTPUT POWER: 105 Watts RMS (15 VDC input, 100W speaker)
SIREN
FREQUENCY: 700Hz - 1500Hz Nominal
CYCLE RATES: MECHANICAL - 5 cycles/min
WAIL - 13 cycles/min
YELP - 190 cycles/min
PHASER - 15 cycles/sec
TWO-TONE - 1 cycle/sec
OPERATING
TEMPERATURE: -15° F to +140° F
SIZE: SC-10XX Amplifier 6" Wide X 2" High X 6" Deep
SC-1012 Control Head 4-1/2" Wide X 2" High X 1-3/4" Deep
SC-1022 Control Head 1-7/8" Wide X 4" High X 1" Deep
WEIGHT: 3.5 pounds
NIGHT VISIBILITY: SC-1002 Backlit front control panel when power is on
SC-1012 Light control switches illuminate when turned on
SC-1022 Backlit front control panel when power is on
AMPLIFIER PROTECTION: High Voltage – Siren output stops with input voltage above highest rating
Stops high output power from blowing speaker
Reverse Polarity – Fuse blows when power is wired backwards
Shorted Output – Fuse blows if speaker shorts (a common problem)
LIGHT CONTROL INPUT POWER: 10-16 Volts DC, 20 Amps Max. not including siren input current
TWO LIGHT CONTROL OUTPUTS: 20 Amps Max. per circuit, 20Amps Max. Total
LIGHT C0NTROL PROTECTION: Shorted Output – Fuse blows
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and information,
contained in this manual at any time without notice.
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to,
the implied warranties of merchantability and fitness for a particular purpose.
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.
See www.carsonsirens.com for latest information.