Filter
Top Products
36
How to use the radio
How to operate the tuner
Because AUTO.P temporarily saves stations for the preset switches, stations saved
manually will remain in memory even if AUTO.P is used. By manually saving stations that
are used regularly, these manually saved stations can be restored even after AUTO.P
has been used, such as after traveling.
Touching while AUTO.P is being used or after AUTO.P has been used will
return the preset memories back to the condition they had before AUTO.P was used.
(Doing so will delete the stations saved with AUTO.P.) The flow for switching from
AUTO.P to manual is shown below.
AUTO.P
About AUTO.P
Touch
AUTO.P
(Stations saved by AUTO.P are deleted)
Automatically saves stations to
preset switches
AUTO.P
(starts search)
AUTO.P
(stops search)
Manual
Touch until a beep
is heard
AUTO.P
•AUTO.P may not automatically receive stations if radio waves in the surrounding
area are weak.
•A station saved by the tuning switch may not match a station saved by AUTO.P
even though the signal is received from the same station.
•Due to conditions for receiving radio waves, saved stations may differ even
when the AUTO.P switch is operated repeatedly in the same location.
•Up to six stations having good reception sensitivity are automatically saved in
order starting from the lowest frequency.
•When less than six stations capable of reception are found, nothing is saved for
the remaining preset switches.
ATTENTION
•Pressing again will turn on the
radio and resume reception of the radio
station (frequency) received before
power was turned off.
PWR
1
Press .
PWR
Turning off the radio