Filter
Top Products
54 VRX935VD
English
Owner’s manual
Setting the beep
∗ The sound heard when you make operations is
called “beep”. The unit can be set up so that it
does not produce this beep sound.
∗ The factory default is “BEEP ON”.
1. When the panel is open, press the [ADJ]
button to select the ADJUST MODE menu.
2. Touch the [ ] key to select “BEEP”.
Touch the [BEEP] key to select “ON” and
“OFF”.
3. Touch the [ON] or [OFF] key to select a
desired mode and set it.
4.
Press the [ADJ] button again or touch the
[RTN] key, The unit returns to the previous
mode.
Setting the motion and sprite
pattern speed
∗ The factory default setting is “HIGH” (high).
1. When the panel is open, press the [ADJ]
button to select the ADJUST MODE menu.
2. Touch the [MOTION SENS] key to select
“HIGH” (high) or “MID” (mid) or “LOW” (low).
3. Touch the [HIGH] or [MID] or [LOW] key to
select a desired mode and set it.
4. Press the [ADJ] button again or touch the
[RTN] key. The unit returns to the previous
mode.
Clock Adjustment
1. When the panel is open, press the [ADJ]
button to select the ADJUST MODE menu.
2. Touch the [ ] key to select “CLOCK”.
Touch the [CLOCK] key to adjust the time.
3. Touch the [w],[z],[a.m] or [p.m] key to
adjust the time.
∗ The time is displayed in 12-hour format.
4. Press the [ADJ] button again or touch the
[RTN] key two times. The unit returns to the
previous mode.
Setting the auto dimmer
The brightness of the color LCD display is
adjusted automatically in proportion to the
surrounding light. The auto dimmer function can
switch between ON and OFF.
ON :Auto dimmer function is set.
OFF:Auto dimmer function is cancelled.
∗ The factory default setting is “ON”.
1. Press the [ADJ] button to display the
ADJUST MODE menu.
2. Touch the [AUTO DIMMER] key to select
“ON” or “OFF”.
3. Touch the [ON] or [OFF] key for setting.
4. Press the [ADJ] button or touch the [RTN]
key to return to the previous mode.
Adjusting the dimmer level
You can adjust the reduced illumination level of
the dimmer. When driving at night with the
inside of the car, the auto dimmer function can
reduce the display illumination linked “to the
illumination power supply of the car” in this
unit in order to prevent glare from the display.
∗ This function is enabled only when the auto
dimmer function is set up to “OFF”.
● The factory default:
When the car light is off: Brightest setting
When the car light is on: Medium brightness
1. When the panel is open, press the [ADJ]
button to display the ADJUST MODE menu.
2. Touch the [DIMMER LEVEL] key to adjust
the dimmer level.
3. Touch the [+] or [–] key to adjust.
4. Press the [ADJ] button again or touch the
[RTN] key two times.
The unit returns to the previous mode.
Setting the button illumination
∗ The factory default setting is “GREEN” (green).
1. When the panel is open, press the [ADJ]
button to select the ADJUST MODE menu.
2. Touch the [ ] key to select “KEY ILLUMI”.
3. Touch the [KEY ILLUMI] key to select “RED”
(red) or “GREEN” (green).
4. Touch the [RED] or [GREEN] key to select a
desired mode and set it.
5. Press the [ADJ] button again or touch the
[RTN] key. The unit returns to the previous
mode.
Other Functions