Clarion XMD3 Car Stereo System User Manual


 
English
20
XMD3
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and
consult your store of purchase.
MD changer
CD
CD changer
MeasureError Display Cause
A CD is caught inside the CD deck and is not ejected.
A CD cannot be played due to scratches, etc.
A CD is loaded upside-down inside the CD deck and
does not play.
A CD inside the CD changer is not loaded.
A CD inside the CD changer cannot be played due to
scratches, etc.
A CD inside the CD changer cannot be played because it
is loaded upside-down.
Displayed when the temperature in the MD changer is
too high and playback has been stopped automatically.
An MD inside the MD changer is not loaded.
An MD inside the MD changer cannot be played due to
scratches, etc.
An MD inside the MD changer cannot be played because
it is loaded upside-down.
Displayed when a non-recorded MD is loaded in the MD
changer.
This is a failure of CD decks mechanism and consult
your store of purchase.
Replace with a non-scratched, non-warped-disc.
Eject the disc then reload it properly.
This is a failure of CD changers mechanism and consult
your store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
Lower the surrounding temperature and wait for a while
to cool off MD changer.
This is a failure of MD changers mechanism and consult
your store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
Load a pre-recorded MD in the MD changer.
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
ERROR H
ERROR 2
ERROR 3
ERROR 6