Filter
Top Products
13
English
DB358RMP
Basic Operations
Adjusting telephone interrupt setting
1. Press the
[
D
]
button and press
[ ]
/
[ ]
button
to select "TEL-SW".
2. "TEL ON" or "TEL OFF" will be display after
2 seconds.
3. Turn the
[
ROTARY
]
knob clockwise to turn on
the Tel Interrupt or counterclockwise to turn
off the Tel Interrupt.
∗ During telephone interrupt, the display shows
"TEL".
This unit requires special wiring to mute the au-
dio signal automatically when a cellular telephone
rings in the car.
∗ This function is not compatible with all cellular tele-
phones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
∗ The factory default setting is “TEL OFF”.
Radio Operations
Listening to the radio
1. Press the
[
SRC
]
button and select the radio
mode. The frequency or PS appears in the dis-
play.
∗ PS: Programme service name
2. To select a preset band, press the
[
BND
]
but-
ton, then select one of the preset bands such
as
FM1, FM2, FM3 or AM. Every time the
[
BND
]
button is pressed, the display will change as:
F1
ÆÆ
ÆÆ
ÆF2
ÆÆ
ÆÆ
ÆF3
ÆÆ
ÆÆ
ÆAM
ÆÆ
ÆÆ
ÆF1...
3. Press the
[ ]
or
[ ]
button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable
broadcast stations; LOCAL SEEK can tune in to
only broadcast stations with a good reception sen-
sitivity.
1. Press the
[
BND
]
button and select the desired
band
(
FM or AM
(
MW, LW
))
.
2. Tune into a station.
∗ If “MANU” is lit in the display, press and hold
the
[
BND
]
button for 1 second or longer.
∗ If “TA” is lit in the display, TP stations are auto-
matically sought.
••
••
• DX SEEK
Press the
[ ]
or
[ ]
button to automatically seek
a station.
When the
[ ]
button is pressed, the station is
sought in the direction of higher frequencies; if
the
[ ]
button is pressed, the station is sought in
the direction of lower frequencies.
∗ When seek tuning starts, “DX” appears in the dis-
play.
••
••
• LOCAL SEEK
If you press and hold the
[ ]
or
[ ]
button for 1
second or longer, local seek tuning is carried out.
Broadcast stations with good reception sensitiv-
ity are selected.
∗ When local seeking starts, “LO” appears in the dis-
play.