Filter
Top Products
English
26
DXZ476MP
TV Operations
Note:
• The following operations are performed the same
as for radio mode:
∗
Channel selection
∗
Storing channels in memory
∗
Calling channels from memory
∗
Auto store
∗
Preset scan
See “
Radio Operations
” (page 13-14) for details.
TV tuner functions
When an optional TV tuner is connected
through the CeNET cable, this unit controls all
TV tuner functions. To watch TV requires a TV
tuner and monitor.
Watching a TV
1. Press the [
SRC
] button and select the TV
mode.
2. Press the [
BND
] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
3. Press the [
x
] or [
v
] button to tune in the
desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
∗
The factory default setting is “
TV
”.
1. Press and hold the [
DISP
] button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [
x
] or [
v
] button to select “
TV/
VTR
”.
3. Press and hold the [ ] button for 1 second
or longer to set to “
VTR
”.
4. To return to the TV broadcast, press and
hold the [
DISP
] button for 1 second or longer
to switch to the adjustment selection display.
5. Press the [
x
] or [
v
] button to select “
TV/
VTR
”.
6. Press and hold the [ ] button for 1 second
or longer to set to “
TV
”.
Setting the TV Area
When you select the TV area (TV reception
area) TV tuner area setting changes.
1. Press and hold the [
DISP
] button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [
x
] or [
v
] button to select “
TV
AREA
”.
3. Press the [
w
] or [
z
] button to select the
reception area.
4. Press the [
DISP
] button to return to the
previous mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
∗
The factory default setting is “
ON
”.
1. Press and hold the [
DISP
] button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [
x
] or [
v
] button to select “
TV
DIVER
”.
3. Press the [
w
] or [
z
] button to set to “ON” or
“OFF”.
• ON:
Sets the diver setting to ON.
• OFF:
Sets the diver setting to OFF.
4. Press the [DISP] button to return to the
previous mode.
DXZ476MP_EN.book 26 ページ ２００７年１月９日 火曜日 午後２時６分