Filter
Top Products
280-8402-00
M455A 25
English
Connecting the iPod CeNET Controller allows
you to operate your iPod from the operation
panel of this unit. This unit has the iPod MENU
mode which allows you to operate by the same
feeling as operating on the iPod.
In the iPod mode, this system considers all the
tracks stored in the iPod as one album when
selecting tracks or playing them back. To search
tracks by the album title or the artist name by
the similar operations from the Music menu of
the iPod, see “Operations in the iPod MENU
mode”.
Notes on using iPod
You can connect the following iPods:
•iPod G3 Ver. 2.3 or higher
•iPod G4 Ver. 3.1 or higher
•iPod Photo Ver. 1.2 or higher
(Images cannot be displayed.)
•iPod mini Ver. 1.4 or higher
•iPod nano Ver. 1.0 or higher
Notes:
•iPod shuffle cannot be connected.
• When the iPod is connected, the operations on
the iPod are prohibited.
• The characters that can be displayed are
alphanumeric characters only. 2-byte characters
cannot be displayed.
Selecting iPod mode
Press the [SRC] button to select the iPod mode.
Note:
• When “NO IPOD” is displayed, check whether the
connectors of the iPod and iPod CeNET
Controller are correctly connected.
Switching the display
Press the [DISP] button to select the desired
display.
Each time you press the [DISP] button, the
display switches in the following order:
iPod Operations
Play time display
The current track number and play time are
displayed.
Number of tracks display
The number of tracks in the Music menu
currently played back and the current track
number are displayed.
Title display
The album title, artist name and song title of the
current track are displayed.
Press and hold the [DISP] button for 1 second
or longer while the title is displayed switches the
title display as follows:
ALBUMS ➜ ARTISTS ➜ SONGS ➜ ALBUMS
➜ …
Play time display
Note:
• Title characters which cannot be displayed by this
unit are displayed with “
∗
”.
Pausing play
1. Press the [ ] button during playback.
The playback is paused.
2. To resume playback, press the [ ] button
again.