Filter
Top Products
Basic Operations
24
MAX667VD
English
Owner’s manual
Adjusting the BASS
The bass gain, bass frequency (center
frequency) and bass Q can be adjusted as
follows.
Adjusting the MID
The MID gain, MID frequency (center frequency)
and MID Q can be adjusted as follows.
Adjusting the TREBLE
The treble gain and treble frequency (center
frequency) can be adjusted as follows.
Adjusting the non fader output
volume
You can adjust the volume output from the unit’s
non fader output terminal.
Turning on/off the MAGNA BASS
EXTEND
The Magna Bass Extend does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
Adjusting the MONITOR
1. Press the [ADJ] button, then touch the
[MONITOR] key.
2. Perform the adjustment for the desired item.
See the following sections for detail.
3. Touch the [Back] key to return to the previous
screen.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
2-1. Touch the []] key of the BASS item.
3-1. When the AUDIO BASS screen is displayed,
touch the [[] or []] key for the desirable type
to adjust to a desirable level.
GAIN :
–6 to 8 (The factory default setting is “0”.)
FREQ. :
50Hz, 80Hz, 120Hz (The factory default
setting is “50Hz”.)
Q :
1, 1.25, 1.5, 2 (The factory default setting is
“1”.)
2-1. Touch the []] key of the MID item.
3-1. When the AUDIO MID screen is displayed,
touch the [[] or []] key for the desirable type
to adjust to a desirable level.
GAIN :
–6 to 6 (The factory default setting is “0”.)
FREQ. :
700Hz, 1kHz, 2kHz (The factory default
setting is “1kHz”.)
Q :
1.5, 2 (The factory default setting is “2”.)
2-1. Touch the []] key of the TREBLE item.
3-1. When the AUDIO TREBLE screen is
displayed, touch the [[] or []] key for the
desirable type to adjust to a desirable level.
GAIN :
–6 to 6 (The factory default setting is “0”.)
FREQ. :
8kHz, 12kHz (The factory default setting is
“12kHz”.)
2-1. Touch the [[] or []] key of the NON FADER
VOL item to adjust to desirable level.
Setting range :
–6 to 6 (The factory default setting is “0”.)
2-1. Touch the [C] key to display the next menu
screen.
3-1. Touch [ON] or [OFF] of the [M-B EX] item to
turn the Magna Bass Extend effect on or off
(The factory default setting is “OFF”).
280QZ6070KA-00.0_EN.book Page 24 Monday, February 27, 2006 2:12 PM