Filter
Top Products
10
English
4) Press the Right button , then set the
current minute.
5) Press the BND button , then the clock is
set.
Notes:
•
If you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.
•
If you remove the vehicle’s battery for a check or
repair, the clock will be reset, so you must set it again.
Radio Mode Operations
FM Reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control and
Multipath noise reduction circuits.
Listening to the Radio
1) Press the FNC button to select the radio
mode, then the radio will be on.
2) To select a preset band, press the BND but-
ton , then select one of the preset bands
such as FM1, FM2, FM3, or AM. Every time
the BND button is pressed, the display will
change as:
FM1
➜ FM2 ➜ FM3 ➜ AM ➜ FM1
3) Press the Left/Right button , then the sta-
tion at which there is a broadcast will be
selected (Seek selection).
Manual Tuning
1) Press the BND button , then select FM1,
FM2, FM3 or AM.
2) Press and hold the BND button for 2 sec-
onds or longer, then the display will show
“
MANU,” which means that a manual selec-
tion function is on.
3) Press the Left/Right button and select the
right station.
Seek Tuning
1) Press the BND button , then select FM1,
FM2, FM3 or AM.
2) If the “
MANU” on the display is on, press and
hold the BND button for 2 seconds or
longer. When the “MANU” display is off, the
Seek Selection function is on.
3) Press the Left/Right button , then when it
selects the station in which there is a broad-
cast, it automatically stops.
Preset Memory Function
Preset Memory Function can store up to 24 sta-
tions: six stations for each of FM1, FM2, FM3
and AM.
Note:
•
When the present memory function is used, all the
content of the memory will be erased.
18
16
16
18
16
16
18
16
16
3
16
18