Dayton Audio DTA-100a Car Amplifier User Manual


  Open as PDF
of 2
 
© Dayton Audio
©
User Manual
www.daytonaudio.com
100 Watt Class T
Digital Audio Amplifier
DTA-10a
Specifications:
Power Output: 50 watts RMS x 2 into 8 ohm
Total Harmonic Distortion: <0.01% @30W
<5.0% @50W
Minimum Speaker Impedance: 6 ohm
Signal-to-Noise Ratio: 103 dB, A weighted
Input Impedance: 2 k ohm ±5%
Frequency Response: 20-20,000 Hz
Channel Separation: 95 dB
Efficiency: 85%
Dynamic Range: >100 dB
Electrical Requirement: 24VDC @ 5A center pin positive
Dimensions: 2" H x 3.375" W x 5.625" D
Weight: 1.0 lbs
Package Contents:
• DTA-100a100WDigitalClassTAmplier
• Worldcompatible24V@5Aswitchmodepowersupply
• 2setsofscrew-typebananaplugsforspeakerconnection
• 3.5mmto¼"headphoneadapter
• 3.5mmto2RCA“Y”cable
• 6"coiled3.5mmaudioinputcable
Warranty
The Dayton Audio DTA-100a is warranted free from defects in material
and workmanship for one year from date of purchase. Warranty does
not apply to misuse, abuse, neglect, accident, improper use, etc.
Note: If an inappropriate power supply or 4 Ohm speakers are used
and the unit is damaged, the warranty will be voided.
Important Safety Instructions
To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified
personnel. To reduce the risk of fire and shock do not expose unit to rain or moisture. The unit should be connected to
an earth grounded AC electrical socket. The unit should be operated in a well ventilated area. Minimum clearance is 2
inches from the ventilation openings.
Model: DTA-100a
Note: Operating this unit with a 4 Ohm load may result in
damage to the amplifier and void the warranty.