Filter
Top Products
15
Advanced Features
Note: If you are traveling long distances, you
may need to repeat this procedure periodically
if you hear interference from local FM stations.
This is due to the differences in the strength
of FM stations being broadcast in these
areas, and not to any problems associated
with your SKYFi2.
In the rare situation that you cannot
find an acceptable open FM frequency,
consult a professional audio installer.
You may improve the audio quality
by using the Delphi FM Direct Adaptor
(SA10112), sold separately.
Adjusting the Audio Level
The factory default setting should
work well in most situations.
However, if you hear distortion, you
should decrease the audio level. If the
XM audio level is too low compared
to other sources such as CD, cassette,
or other FM stations, you may want to
increase the audio level.
1. Press the “menu” button.
2. Use the scroll wheel (or remote) to
select “Audio Level.” Press the
“XM” button to confirm.
3. Use the scroll wheel (or remote) to
select the desired level. Press the
“XM” button to confirm selection.
4. Press the “menu” button to return
to the main menu and then again
to return to normal operation.
Note: This is not a volume control. This
feature should be used to better match the
SKYFi2 audio level with the other audio
sources in the receiver. Set the volume
using the audio system or FM radio
connected to your SKYFi2.