Delphi SA10085 Car Satellite Radio System User Manual


  Open as PDF
of 6
 
T
c
T
T
o
T
w
o
t
S
Y
T
Some Other Features to Know About…
Basic Channel Selection
Press the Preset/Direct button until “Direct Entry” displays, then:
• Use Number Keys: Press the number keys in the bottom row to enter a channel
number, for example
5 then 0
for channel 50 or
1 then 2 then 1
for channel 121.
• Use the Tuning Wheel: Turn the Tuning Wheel on the corner of your Delphi XM
Roady2 to increase or decrease channel number; then press it
in
to select that channel.
Presets
Your Delphi XM Roady2 has three banks of presets: A, B, and C. Each bank of presets
can hold up to 10 channels.
To set a preset, first go to the channel you want to set as a preset—make sure that it
is playing. Then choose a preset bank where you wish to store it (use the
Preset/Direct button). Then, press and hold (for 2 seconds) the number key you wish
to use for that channel. The radio will beep once and display the preset number that
has been set.
To choose a preset channel, make sure you are in the right preset bank. (Press the
Preset/Direct button until Preset A, Preset B, or Preset C appears.) Then, press the
number key for the preset channel you wish to play.
Menu
The menu in your Delphi XM Roady2 lets you change the colors and contrast of the
display, set the FM frequency, set the audio level, optimally position a home antenna,
recall stored song titles and artist names, erase song titles from your TuneSelect
™
list,
enter and delete stock symbols from the stock ticker, activate or turn off Direct Tune,
change your Auto-On and Auto-Off settings, and restore your unit to the factory
default settings. See your Delphi XM Roady2 User Guide for an explanation of these
features.
Warning: When using this product it is always important to keep your eyes on the road and your
hands on the wheel. Not doing so could result in injury to you or to others or in property damage.
Roady QuikGuide silver 4x4 4/13/04 6:24 PM Page 1
 previous