Filter
Top Products
1. Determine the mounting location and drill four mounting holes (see the figure
above).
2. Attach the mounting bracket to the holes with the self-tapping screws (ø4x10).
3. Let the two levers aim at the slots on the DVD bracket to fix the display unit.
4. Open the monitor to display the five screw holes.
5. Attach the unit to the bracket with the mounting bolts (M 3.5x10).
6. Insert five rubber caps into the screw holes.
7. When the installation has completed, you can turn the display upward or down-
ward, left or right to adjust the viewing angle. (See the arrowhead symbol in
the figure above).
Slots
Rubber Caps
Mounting Bolts (M3.5x10)
DVD Bracket
Levers
Mounting Bracket
Self-tapping Screws (
ø4x10)
© 2004 Directed Electronics, Inc.
99