Filter
Top Products
5
XNP - SBX SERIES INSTALLATION
Mounting
1. Determine where the speakers will
be mounted. Ensure an area large
enough for the speaker to mount
evenly. Be sure that the mounting
location is deep enough for the
speaker to fit.
2. Refer to the specification chart to
determine the proper diameter hole
to cut for your speaker model.
3. If supplied, use the plastic mounting
ring as a template to mark the
locations for the mounting screws.
Drill the holes with a 1/8" bit.
4. Be sure to observe proper polarity
when connecting the wires.
The speaker's positive terminal is
indicated with the “+” symbol.
5.
Fit the ring and speaker to the cut-out.
Mount them using the enclosed screws.
If supplied, fit the grille inside the ring
and press gently, but firmly, into place
and attach with screws.
Lighting Hook-Up Recommendations