XDVD8281 OPERATION
15
General Operation
Power On/Off
Mute
Mode
Optional Mode Selection
Volume
Audio Adjustment
(from front panel)
Audio Adjustment
(from remote)
Press to turn the unit on. Hold for 3 seconds to turn the unit off.
Press MUTE to silence the audio; 00 will appear in the OSD (On Screen
Display). Press MUTE again to cancel.
Press MODE to select between Tuner, Disc, Aux AV input and Camera. Modes
of operation are indicated in the OSD (On Screen Display).
Press the top left corner of the screen to display the OSD menu bar. Press
Tuner, Disc, Aux AV input or Camera input in the MAIN menu page to select
the desired source.
Adjust VOLUME using rotary encoder or the VOL +/- buttons (00-40).
Press rotary knob for 3 seconds, then release. Press rotary momentarily to
advance to desired parameter to be changed.
Turn rotary Q or P to adjust to desired level. Press rotary to advance to next
selection, and press and hold to exit.
Press the SEL button. Press the p or q buttons on the remote to select an
item to be adjusted. Press or to adjust the desired setting. Press the
ESC button on the remote control to exit the audio control menu.
Notes: The Bass and Treble levels are only adjustable when EQ is set to
"User” mode. The Loud function compensates for deficiencies in sound
ranges at low levels. When the Loud function is on, LOUD is displayed in the
OSD.
00
L
00
00
00
00
R
R
F
L
Audio Settings
ITEM RANGE
EQ
USER FLAT
JAZZ POP
CLASSIC ROCK
NEWS URBAN
RAVE MOVIE
TECHNO
BASS -7 +7
TREBLE -7 +7
FADE -9 +9
BALANCE -9 +9
SUB -7 +7
LOUD OFF ON