Filter
Top Products
9
XHD6425 OPERATION
Analog and Digital Tuning
Seek Tuning
Manual Tuning
Scan Tuning
Storing and Recalling
Station Presets
The following tuning functions will access both analog and
digital stations. Refer to the HD SEEK mode section on page
10 for instructions on tuning to only digital stations.
Press TUNE
nn
or TUNE
ll
momentarily to seek the
next strong station.
When an HD Radio station is selected, an HD Radio logo will
begin to flash on the display. In about five seconds, HD or
HD1 will illuminate after the radio frequency.
• If "HD" appears, the radio station is broadcasting a higher
quality sound. No additional stations are available.
• If "HD1" appears, additional multicast channels (HD2
and/or HD3) are available. Press
TUNE
nn
or
TUNE
ll
to tune to other available multicast channels.
Press TUNE
nn
or TUNE
ll
for more than two seconds,
then release. "MANUAL" will momentarily appear in the
display. Press TUNE
nn
or TUNE
ll
momentarily to
move radio frequency up or down one step at a time. Press
and hold to advance quickly. If tuning is not adjusted for five
seconds, the unit will return to seek tuning mode (default).
"AUTO" will momentarily appear in the display.
Press SCN to preview strong stations on the current band,
pausing for five seconds at each. Press SCN again to cancel.
Up to 18 FM stations and 12 AM stations can be stored,
including HD Radio stations. To store a station, first select
the desired band and station. Press and hold the desired
preset button (1-6) for more than two seconds. When stored,
the preset number appears in the display. The station can be
recalled by pressing the corresponding preset button.
Note: Function keys 7, 8, 9 and 0 apply to MP3/WMA, USB
and Bluetooth operation only.
HD Radio™ AM/FM Tuner Operation