Filter
Top Products
10
XIA5600 OPERATION
Specifications
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/-0.2V, 20Hz~20kHz)
Power Output: 200 Watts RMS x 2 channels at 4 ohms and < 1% THD+N
Signal to noise ratio: 74dBA (reference: 1 watt into 4 ohms)
Additional power output:
250 Watts RMS x 2 channels at 2 ohms and < 1% THD+N
500 Watts RMS x 1 channel at 4 ohms (bridged) and
< 1% THD+N
Dynamic power: 1000 Watts at 4 ohms (bridged)
Speaker output impedance: 2~8 ohms (stereo), 4~8 ohms (bridged)
illuminite output voltage: 12VDC
illuminite output current: 2 amp
Low level input range: 200mV~6V (10k ohms)
High level input range: 2V~10V (100 ohms)
Bass boost: 0~12dB @ 45Hz
Crossover range: 40~400Hz
Crossover slope: 24dB/octave
Power supply: 11-16 VDC, negative ground
Fuses: 30 amp ATO x 3, 2 amp ATO x 1
Amplifier dimensions: 18.5" x 2.36" x 9.96" (WxHxD)
(470 x 60 x 263 mm)
Typical installation dimensions: 19.5" x 3.5" x 11" (WxHxD)
(495 x 89 x 279 mm)