Filter
Top Products
2
XOBP12D
PREPARATION
Getting Started
Safety
This symbol is intended to alert the user to the presence
of important instructions. Failure to heed these instructions
can result in injury or damage to the unit.
To prevent injury and damage to the unit, please read and
follow the instructions in this manual.
If you feel unsure about installing this system yourself,
have it installed by a qualified audio technician.
Before installation, disconnect the battery negative (-)
terminal to prevent damage to the unit, fire and/or
possible injury.
Do not connect Amplifier or any audio source to illumination
inputs. These inputs are designed for 12 volt power only.
Thank you for purchasing the Dual Electronics XOBP12D Bandpass Subwoofer System.
Although Dual has attempted to make sure all of the information contained within this
manual is accurate, please be aware that any part of it is subject to change without notice.
Illuminite inputs are designed for 12 volt DC power source only.
Do NOT connect your illuminite product directly to your battery
permanently, as it will cause your battery to discharge. Please use
switched 12 volt source.