4
Legal notice
6 Fit the ring and speaker to the cutout. Mount them using the enclosed screws. If
supplied, fit the grille inside the ring and press gently, but firmly, into place.
The diagram featured above is to be used in conjunction with the specifications guide below:
Legal notice
Copyright
© 2006 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services,
Inc. Other brands and product names are trademarks or registered trademarks of their
respective holders. Specifications and features are subject to change without notice or
obligation.
For service and support call (800) 305-2204.
Specification Measurement
Mounting height
7/16
Top-mounting depth 2 ¼
Tweeter protrusion ¼
Bottom-mounting depth 2
11/16
Cut-out diameter 5 ½
Sensitivity (dB) 86
Frequency response 80-20 K
Recommended power (watts RMS) 60
Peak power handling (watts IPP) 120
Grille (yes or no) Yes
Cut-out diameter
Top-mounting depth
Bottom-mounting depth
Mounting height
Tweeter protrusion
DX-S1000.fm Page 4 Saturday, January 13, 2007 11:01 PM