Filter
Top Products
STEP 4-Connecting the Power Cable
Depending on where you live, you will use either the European or US/Canadian power cable.
• Connect the female end of the power cable to the medical grade power adaptor.
• Connect the brick power cable into the power port on the touchmonitor.
• Route the cable through the cable management channel.
NOTE: To protect your equipment against risk of damage from electrical surges in the power line, plug the
touchmonitor’s power cord into a surge protector, and then connect the surge protector to a grounded AC
electrical outlet.
2-11
CONNECTIONS ON UNDERSIDE
POWER CABLE
DC POWER