Filter
Top Products
Connector Panel & Interfaces
Touchmonitor Connections
1. Connect the HDMI, DVI, or VGA video cables between the monitor’s HDMI/DVI/VGA input
connectors and your HDMI/DVI/VGA video source. Tighten the video cable’s screws for best
performance.
2. Connect the USB touch cable between the monitor’s USB connector and your PC’s USB
port. (Not applicable for ET3243L-0NXX models)
3. Connect the power cable to the monitor’s input power jack and the AC power outlet.
4. The touchmonitor ships in an ON state, video should be displayed on your monitor already.
User Manual: 3243L
SW601960 Rev A, Page 6 of 26