Filter
Top Products
G4000A OPERATION MANUAL
15
HOW TO SET THE SLEEP TIMER
Press the SLEEP button over and over. Each press
changes the amount of time the radio will play before
shutting off automatically, 60 through 0
minutes.
HOW TO USE THE DIAL LIGHT
(button on top of radio)
The LIGHT button causes the display to be illuminated.
After 10 seconds, or when the LIGHT button is
pressed again, the light will go out.
USING THE CLOCK, ALARM AND SLEEP TIMER FEATURES
14
8 USING THE CLOCK, ALARM AND SLEEP TIMER FEATURES
HOW TO SET THE CLOCK
This can be done with the radio on or off.The
G4000A’s clock is a 24 hour clock only, e.g. 6’oclock
in the morning will read as 6:00; 6 o’clock in the
evening will read as 18:00.There are two clocks,
TIME I and TIME II. Select one or the other by pressing
the TIME 1/2 button.TIME I or TIME II shows in
the display at top center. Set the time using the
examples below.
EXAMPLE 1: If it is 06:00 hours press 6 . 0 0,
then immediately press the TIME 1/2 button.
EXAMPLE 2: If it is 15:32 hours press 1 5 . 3 2,
then immediately press the TIME 1/2 button.
HOW TO SET THE ALARM CLOCK
The alarm time is shown in the upper left corner of
the display, under “ON TIME,” when the radio is off.
To set the alarm to activate at 6:30:
1. Press 6 . 3 0 (be sure to include the decimal point)
2. Immediately press and release the ON TIME button.
3. Select the alarm mode using the AUTO button.
HOW TO CONTROL THE ALARM
CLOCK
• Press the AUTO button several times while
looking at the upper left corner of the display.
• The “musical note” symbol wakes you to the
radio playing the last station it was set to.
• The “bell” symbol wakes you to a beeper sound.
• When both symbols disappear and -:— appears,
THE ALARM IS DEACTIVATED.
HOW TO USE THE ALARM
CLOCK’S SNOOZE FEATURE
(button on top of radio)
Once the alarm has activated, you can get 5 minutes
more sleep by briefly pressing the SNOOZE button.
You can repeat this as many times as you like.
By pressing the SNOOZE button for more than
2 seconds, you can completely shut off the alarm.
continued