Filter
Top Products
MPA 401-70V and MPA 401-100V Features
Patented CDRS (Class D Ripple Suppression) — CDRS is an Extron patented
technology that eliminates high frequency switching ripple and EMI emissions found in
all Class D amplifiers. CDRS dramatically improves audio performance over conventional
Class D amplifier designs and enables Extron power amplifiers to be situated near wireless
A/V devices without RF interference.
UL 2043 plenum rated — The amplifiers meet UL 2043 for smoke and heat release for
installation within a plenum airspace above a drop ceiling. Above-the-ceiling placement
conceals the amplifier to prevent theft and is convenient for installing equipment when
space inside the room is limited.
Balanced and unbalanced buffered audio inputs — Both amplifiers accept balanced
or unbalanced, stereo or mono audio input signals on a captive screw connector, and
unbalanced audio on both RCA connectors and a 3.5 mm stereo mini jack.
NOTE: The amplifiers mix all right channel inputs to a single signal and all left channel
inputs to a second signal. The right signal and left signal are then summed to
produce a mono signal.
The three stereo inputs are individually buffered and can be connected to three separate
sources at the same time without altering performance.
Quick-plug speaker outputs — Speaker output is on a 5 mm screw lock captive screw
connector for quick installation.
ENERGY STAR
®
qualied amplier — The MPA 401-70V and MPA 401-100V amplifiers
are ENERGY STAR qualified amplifier and energy efficient products that conserve energy
and reduce costs.
Auto-standby with fast power up — automatically places the amplifiers into standby
after 25 minutes of inactivity. They quickly return to full power status in less than one
second upon signal detection. The amplifiers consume just 6 watts when idle and less than
1 watt in standby mode.
Front panel bass, treble, and input level controls — Bass, treble, and input level are
easily adjusted from the front panel.
Fanless design — The amplifiers do not require fans or vents for cooling, ensuring quiet,
reliable operation.
Automatic clip limiter — Detects actual onset of clipping by comparing input and output
waveforms. Gain is automatically reduced with a slow attack and fast release to eliminate
clipping. This advanced limiter design protects the speakers from clipping distortion and
offers superior sonic characteristics compared to limiters that use signal compression.
Remote volume and mute control port — A rear panel, three-pin captive screw remote
input connector allows remote adjustment of volume and muting. In basic installations
without third-party control systems, this port allows the amplifiers to be remotely
controlled using the optional Extron VCM 100 series analog volume and mute controller or
VC 50 analog volume controller.
Compact size — The 1U, quarter rack width, 6 inch deep metal enclosure, offers flexible
mounting options.
MPA 401-70V and MPA 401-100V • Introduction 2