Filter
Top Products
Enclosed in a fully shielded housing, Meridian’s unique DSP processing is performed on
a specially-designed six-layer PCB using a powerful 100 MIPS Motorola DSP engine.
Thanks to this sophisticated audio computer, the DSP420 embodies identical high-tech-
nology features to those found throughout the Meridian DSP Loudspeaker family. These
include:
• Position control to compensate for speaker location
• FIFO memory buffer at the input for the lowest possible jitter
• Linear-phase crossover for precision drive unit integration
•Tweeter delay for perfect driver alignment
• 48-bit resolution volume control
• Minimal frequency equalisation, delivering a frequency response free from drive unit
or electronic colouration
•Transparent tone controls
• Absolute phase control
• Phase-corrected balance control
Active Bass Extension
A further DSP-enabled enhancement to the audio performance of the DSP420 is
Meridian’s active bass extension. This deepens the response of the system without exces-
sive woofer excursion and in turn produces a convincingly ‘big box’ sound from an in-
wall unit. At moderate volumes, a psychoacoustially-correct filter extends the bass
response much further than can be achieved with an analogue speaker of equal size,
while at high volumes dynamic DSP bass protection is used to prevent the woofers from
bottoming.
Acoustics
The DSP420’s front baffle and acoustic back box are made from aluminium. This offers
very low resonance at low frequencies and is further damped by the incorporation of
stiffening into the back box. Additional high frequency damping means that the whole
system suffers exceptionally low cabinet colouration and delivers excellent mid-range
transparency. All damping materials have been fully tested and in all cases comfortably
meet or exceed building regulations for in-wall design.
The bass drive units are two parallel 5in woofers with cast alloy chassis, carbon fibre
cones and very large shielded magnets that provide excellent drive and control.
The high frequency dome tweeter has a Neodymium magnet and a protective grille,
while an acoustically transparent grille protects the front baffle and drive units from
harm when installed. Its powder finish means the grille can be easily painted, helping
the DSP420 to blend in with its surroundings.
Moving Walls
One of the major advantages of the Meridian Digital Theatre approach is the ability to
make changes to audio signals in the time domain. This includes the ability to introduce
time delays to each of the channels in a system, giving the listener the impression that
the source of the delayed channel has moved further away in space.
With DSP420 loudspeakers installed in the walls of a Meridian Digital Theatre, time
domain changes can be used to push back walls and completely change the acoustical
characteristics of any sized room. In practice this means the listener experiences a
greater impression of size and space within a surround sound system, making both
music and movies more immersive and more convincing. Rear and side channel delays
can now be used to increase the length and width of your theatre without the need to
call in the builders!
Outline Specification
Inputs: 1 x 75Ω coaxial digital input, IEC958 (S/PDIF), 44.1kHz – 96kHz.
FIFO locks at 44.1, 48, 88.2, & 96kHz ±150 PPM, PCM & MHR.
Enclosure: Aluminium front baffle with sealed, mechanically damped and insulated
acoustic enclosure. Baffle finished in textured black enamel.
Grille finished in easy-to-paint white powder coat, backed by acoustically-
transparent scrim. White moulded custom paintable frame.
Acoustics: 2-way Infinite Baffle enclosure.
2 x 127mm high-efficiency long-throw custom bass drivers,
1 x Meridian 25mm tweeter with aluminium dome.
Response: 55Hz – 20kHz ±3dB.
Amplification: Internal 85W woofer, 65W tweeter. 6VA (quiescent) – 200VA (full output).
DSP: 100MHz Motorola 56364, Linear Phase Crossover, 96kHz, 24-bit DAC.
Controls & Indicators: Front baffle controls for power and channel selection.
LED indicators for power, lock and thermal warning.
Approx. Dimensions: Frame 450mm (17.72in) square, depth 102mm (4.02in) Hole cutout 357 x 388mm (14.1 x
15.28in) Note: dimensions are approximate. See installation drawings for detailed informa-
tion. The DSP420 is designed to fit standard 16in stud centres.
Approx. Weight: 8.5 kg (18.7 lb) main unit without frame, grille or connection box.
Mounting: Easy-install frame with fireproof power connection box. Templates provided for both new
construction and installation into existing walls.
The DSP420 is not designed for ceiling installation.
DSP420
Digital Signal Processing
In-Wall Loudspeaker System
The DSP420 uses the same design
principles as the famous Meridian
DSP8000 and is perfect for use in a
Meridian Digital Theatre
®
where a
discreet appearance is required
DSP420DS v3.1 16.04.03 RE