Filter
Top Products
2
Flush mounting
See the outline drawing at the end of the manual for mounting dimensions.
CAUTION
Hold the cover and display unit
together when lifting the display unit.
The display unit may fall out if only the
cover is held.
1. Remove the LCD cover from the unit.
2. Using the paper template supplied in the installation materials, make a cutout in the
mounting location.
3. Insert the display unit to the cutout, and fasten the display unit to the mounting location
with four self-tapping screws (5x40, supplied as accessories).
Note: Hex head bolts may also be used to fasten the display unit. However, their lengths
should be such that they extend at least 10 mm beyond the bulkhead.
Waterproofing: IP20
Waterproofing: IPX5
Cosmetic cap
Mounting dimensions
4. Attach the cosmetic caps (supplied as accessories) to the display unit at the locations
shown in the drawing above.