POWERPLANT
SUBWOOFERS
PP-SW120, PP-SW150
Subwoofer Parameters
Optimum Enclosures
RECORD YOUR PURCHASE DETAILS HERE:
MODEL NUMBER __________________________ DATE OF PURCHASE__________________________
AFFIX RECEIPT HERE
WARNING! Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may
cause permanent hearing loss! Please watch for emergency vehicles as warning signals may not be heard. USE COMMON SENSE!
V 1.0
PP-SW120 PP-SW150
Max Power Rating 1200 Watts 1500 Watts
RMS Power Rating 500 Watts 625 Watts
Frequency Response 25Hz - 2.5kHz 20Hz - 1.5kHz
Impedance 2 x 2 Ohms 2 x 2 Ohms
Sensitivity 90 dB 91 dB
Compliance (Cms) 207.925 91.005
Cone Area (Sd) 490.87 754.77
D.C. Coil Resistance (Re) 3.6 (1.8 x 2) 3.6 (1.8 x 2)
Electrical Q (Qes)
0.475 0.397
Force Factor (Bl) 12.471 21.715
Free Air Resonance (Fs) 37 33.620
Linear Excurson (Xmax) 30 30
Mechanical Excursion (mm) 9 9
Mechanical Q (Qms) 3.345 2.643
Total Loudspeaker Q (Qts) 0.416 0.345
VAS (L)
71.142 73.618
VAS (CuFt) 2.5 2.6
Ported PP-SW120 PP-SW150
Volume (litres) 41 60
Volume (cu.ft.) 1.48 2.2
Port diameter 101mm/4” 101mm/4”
Port length 348mm / 13.73” 350mm / 13.75"
Tuned frequency (Hz) 40 38.5
Sealed
Volume (litres) 27 45.5
Volume (cu.ft.) 1.0 1.6
Tuned frequency (Hz) 75 80
Installation Warning
1. Ensure the vehicle 12 volt lead is removed before any equipment is connected.
2. Investigate the vehicle’s gas tanks, brake lines and electrical wiring locations before you begin installation.
3. Attach the product securely to the vehicle to prevent damage in the event of an accident.
4. Ensure all wiring is protected to avoid damage or pinching of the cables.
YOU CAN HELP PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations:
Hand in the non-working electrical equipment
to an appropriate waste disposal center.
PUBLISHED BY FUSION ELECTRONICS LIMITED:
© Copyright 2006 by FUSION Electronics Limited.
All rights reserved. Specifications and design are
subject to change without notice.