Filter
Top Products
4 5
FAN COOLING – The chassis is cooled via a thermal sensing fan design. The fan is always ON but will increase in
speed as demand on the amp increases. Do not obstruct the left or right chassis vents.
SPEAKER OUTPUTS – The SHUTTLE
®
6.2 provides two Neutrik Speak-On™ connectors (wired 1+/1-). The speaker
jacks are paralleled. The minimum speaker load is 4 ohms. Do not ground either the “+” or the “-” outputs.
POWER INPUT – VOLTAGE SELECTOR SWITCH - The SHUTTLE
®
6.2 utilizes rear panel switch selectable
universal power supply that operates from 100V to 240 volts, 50 to 60 Hz for world-wide use. Simply set the switch
to the appropriate AC mains voltage (BEFORE connecting to the power source), and utilize the proper IEC cord-set
appropriate for the country the product is being used.
For countries using 100V, 110V, 115V and 120V AC mains, select the 115V switch position on the Voltage Selector
switch.
For countries using 220V, 230V, and 240V AC mains, select the 230V switch position on the Voltage Selector switch.
There is no externally accessible AC mains (line) fuse. The internal fuse is integral to the SMPS power supply and is
not user serviceable. This fuse will not fail except under very unlikely fault conditions to the SMPS, and if this occurs a
qualied service technician is required to correct the problem.
CHASSIS DESIGN – The SHUTTLE
®
6.2 ULTRA LIGHT DESIGN utilizes the highest quality aircraft grade, computer
machined aluminum chassis. To clean the amplier, nothing more than a damp cloth and a little bit of glass cleaner
(Glass Plus
®
) should be used.
RACK MOUNTING – The SHUTTLE
®
6.2 is designed for optional rack mounting in a standard EIA style 19” equipment
rack or tour-case. Optional rack mounting kit is available from your dealer. Model# STL-RK.
GIG-BAG – A custom padded carry bag with shoulder strap is available as an optional accessory from your dealer.
Model# STL-BAG. This padded bag is ideal for convenient carrying of the amplier. Do not operate the amplier inside
the carry bag, as the chassis aluminum construction and cooling fan inlet vents are part of the amplier’s cooling
mechanism.
COMBO VERSIONS - REMOVABLE CHASSIS FEATURE—A unique element of the SHUTTLE
®
6.2 combo models
is the ability to easily remove the amp “head” from its protective “saddle” and use the SHUTTLE
®
amp with larger
enclosures for bigger venues.
Removal of the chassis is simple. We recommend rst unplugging the speaker cable from the back of the chassis.
Step One:
• Unscrew the large thumbscrews on both sides of the
chassis’ saddle.
It is recommended to screw these back into the chassis
after the amp is removed, so they are not lost.
Step Two:
• After the thumbscrews are removed, gently slide the
chassis forward using both hands to move it forward in
the saddle.
Step Three:
• As the chassis appears from within the saddle, grab it from the front end and remove it completely from the
protective saddle.