![](http://pdfasset.owneriq.net/b/f0/bf0a3231-197e-4a28-a939-7dc438770e26/bf0a3231-197e-4a28-a939-7dc438770e26-bg1.png)
COPYRIGHT © JANUARY, 2008 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR10412 PRINTED IN TAIWAN
What Changed?
The locking system for the sliding table has been
updated to include two locking mechanisms, as
shown in Figure
1, and is used as noted below.
This update covers changes made to the machine after the owner's manual was printed. All page num-
ber references refer to the owner's manual for this machine. Keep this update with your owner's man-
ual for future reference. If you have questions, contact Tech Support at (570) 546-9663 or by email at
techsupport@grizzly.com.
MODEL G0588/G0591
SLIDING TABLE SAW
MANUAL UPDATE
Figure 2. Configuration to lock the table so it is
centered with the saw cabinet.
Figure 3. Configuration to freely slide table.
Figure 4. Configuration to extend the table
beyond the regular stopping position.
Figure 1. New sliding table handle with two lock
handles.
Center Locking Table (Figure 2): This configu-
ration locks the sliding table so it is centered with
the saw cabinet. This position is typically used for
cuts when the sliding table must remain in a fixed
position, such as with traditional rip cuts.
Freely Sliding Table (Figure
3): This configura-
tion allows the sliding table to slide freely for regu-
lar operation of the sliding table saw.
Extending Table (Figure
4): This configuration
allows the sliding table to extend beyond its regu-
lar stopping point for cutting longer workpieces or
gaining access to the internal blade guard.