Hanns.G HSG1097 Car Video System User Manual


 
User’s Manual
display, which does not ensure the image is shown as is or in
initial scale. FITindicates scaling by the proportion of original
images, which may cause the screen showing black bands. [The
availability of this function depends upon the selected model]
H-POSITION
Select the H-POSITIONoption to shift the screen image to the
left or right. Enter the option and adjust the level. [For VGA
only]
V-POSITION
Select the V-POSITIONoption to shift the screen image up or
down. Enter the option and adjust the level. [For VGA only]
CLOCK
Select the CLOCKoption to reduce the vertical flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
PHASE
Select thePHASEoption to reduce the horizontal flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
SHARPNESS
Select theSHARPNESSoption to adjust the sharpness of the
display. Set the value from -2 to 2.
VIDEO MODE
ChooseVIDEO MODEor PC MODEfor video
transmission. While using HDMI or HDMI to DVI ports for
video transmission, the video will appear cut off slightly around
the edge; choosePC MODEto view videos with complete
image. (VIDEO MODE only functions for inputs from HDMI or
DVI that supports HDCP video (YUV format))
RESPONSE TIME
Setup the display response time through the Response time
function. Available settings are MINIMUM,
INTERMEDIATE, and MAXIMUM. [This feature is limited to
specific models only.]
OSD SETTING
LANGUAGE
Select LANGUAGE option to change the language of the
OSD. Enter the option and select a language. [Reference only,
the OSD Language depends on the selected model]
H-POSITION
Select H-POSITIONoption to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
V-POSITION
Select V-POSITIONoption to adjust the vertical position of
the OSD. Enter the option and adjust the level.
TRANSPARENCY
Select TRANSPARENCYoption to adjust the transparency of
17