Filter
Top Products
Back to Contents Page
Using the Monitor
Operating Instructions • External Controls • Settings •Setting the Optimal Resolution • Adjusting the Volume •
Locking and Unlocking the OSD • Adjusting OSD Settings
Operating Instructions
Control buttons are located on the front of the panel, as shown below. Use the menu button (C) to adjust the
display settings to your personal preferences:
• Set up the monitor, attach the cables, and adjust the tilt as described in the Setup section above.
• Press the power button (F) to turn the monitor on and off. The power indicator lights up when the monitor is on.
• The monitor must be turned on for the other control buttons to work.
• Set the resolution (Setting the Optimal Resolution) and adjust the volume (Adjusting the Volume).
• Adjust the onscreen display (OSD) settings (Adjusting OSD Settings).
10